PIXCI® E8 - Alrad

PIXCI® E8

PCI Express x8 Camera Link Frame Grabber

Features

  • PCIe x8 frame grabber
  • Operates in PCI express bus x16 or x8 slot
  • 20 gigabit per second burst DMA transfer rate
  • 850 megabytes per second sustained transfer rate
  • Power over Camera Link selectable
  • Two 26-pin MDR Camera Link connectors
  • 64-bit memory addressing

Image Capture

  • Base, medium, full, or 80-bit camera
  • Two base cameras
  • Line scan or area scan cameras
  • Monochrome or color cameras
  • Individual lines or frames
  • Triggered image sequence

Trigger, Strobe, and I/O Signals

  • Camera exposure and asynchronous reset control
  • Trigger and frame enable inputs
  • Strobe output
  • General purpose inputs and outputs

Key Specifications

  • 12 volts @ 120 mA, 3.3 volts @ 720 mA
  • 13.1 cm long, 10.6 cm high, 5.15" long, 4.15" high
  • 102 grams,  3.6 ounces
  • 0 to 70 degrees Celsius operation
  • CE, FCC, ROHS compliant
  • Camera pixel clock frequencies from 20 to 85 MHz
  • Made in U.S.A.

Software

  • XCAP-Lite image capture, display, and save program included with frame grabber purchase
  • XCAP-LTD captures video to computer memory and more..
  • XCAP-STD streams video to disk and performs image processing and more..
  • PIXCI Selection Guide  lists cameras supported with dedicated Capture & Adjust dialogs
  • XCAP supports all camera link cameras connected to PIXCI® frame grabbers
  • XCLIB programmer libraries for frame grabber and camera control
  • PXIPL image processing, measurement, and analysis libraries
  • Windows & Linux, 32 & 64-bit
  • TWAIN compatible

 

Specifications:

SIGNAL INPUT & OUTPUT:
EIA RS-644 (LVDS) Drivers & Receivers support pixel clock frequencies up to 85 MHz.
PERFORMANCE (Camera Link):
Supports the camera's maximum:
Horizontal Resolution
Vertical Resolution
Frame Rate
Bit Depth
CONNECTIONS:
Two 26-pin 3M MDR Camera Link connectors for Full, Medium, and Base.
10-pin header for Trigger, Frame Enable, and Strobe.
10-pin header for General Purpose Inputs and Outputs.
BUS REQUIREMENTS:
PCI Express x8 Bus slot.
Operates in PCI Express Bus x16 or x8 slot.
POWER REQUIREMENTS:
12 V @ 120 mA
3.3 V @ 720 mA
Total 3.816 Watts
DIMENSIONS:
13.08 cm long by 10.55 cm high
(5.15" long x 4.153" high)
CERTIFICATIONS:
CE. FCC, & ROHS Compliant
EPIX SOFTWARE Support:

Supported by XCAP-Lite (no charge with board purchase), XCAP-Ltd, XCAP-Std, XCLIB, and XCLIBIPL. 
Compatible with 32-bit & 64-bit Windows 10, 8, 7, Vista, XP, 2000, LINUX, and 32-bit DOS. Also TWAIN and Image-Pro Compatible.