PIXCI® E4G2 - Alrad

PIXCI® E4G2

PCI Express 2.0 x4 Camera Link Frame Grabber

 

Features

  • PCI Express 2.0 x4 frame grabber
  • Use in PCI Express Bus x16, x8, or x4 slot
  • 20 gigabit per second DMA burst transfer rate
  • 1400 megabytes per second sustained transfer rate
  • Two or four 26-pin MDR Camera Link connectors
  • 64-bit memory addressing

Image Capture

  • Four base; two medium, full, or 80-bit cameras
  • Monochrome or color cameras
  • Individual lines or frames
  • Continuous video
  • Triggered sequence
  • To disk or memory

Trigger, Strobe, and I/O Signals

  • Camera exposure and asynchronous reset control
  • Trigger and frame enable inputs
  • Strobe output
  • General purpose inputs and outputs

Key Specifications

  • 12 volts @ 120 mA, 3.3 volts @ 720 mA
  • 11.46 cm long, 9.86 cm high, 4.51" long, 3.88" high
  • 101 grams, 3.56 ounces
  • 0 to 70 degrees centigrade operation
  • CE, FCC, ROHS Compliant
  • Camera pixel clock frequencies from 20 to 85 MHz
  • Made in U.S.A.

Software

  • XCAP-Lite image capture, display, and save program included with frame grabber purchase
  • XCAP-LTD captures video to computer memory and more..
  • XCAP-STD streams video to disk and performs image processing and more..
  • PIXCI Selection Guide  lists cameras supported with dedicated Capture & Adjust dialogs
  • XCAP supports all camera link cameras connected to PIXCI® frame grabbers
  • XCLIB programmer libraries for frame grabber and camera control
  • PXIPL image processing, measurement, and analysis libraries
  • Windows & Linux, 32 & 64-bit
  • TWAIN compatible
  • 3rd Party software solutions also available.

Specifications:

SIGNAL INPUT & OUTPUT: EIA RS-644 (LVDS) Drivers & Receivers support pixel clock frequencies up to 85 MHz.
PERFORMANCE: Supports the camera's max resolution, frame rate, and bit depth up to
1390 megabytes per second data transfer rate.
CONNECTIONS: Four 26 pin MDR Camera Link connectors for up to four Base cameras or one or two 80-Bit, Full, or Medium cameras.
Two 10 pin headers for trigger inputs and strobe outputs.
Optional bracket with two additional MDR connectors and internal cables to connect a second 80-Bit camera, or a second Medium or Full camera, or a third and fourth Base camera.
BUS REQUIREMENTS: PCI Express 2.0 x4 or better (5 GT/s)
PCI Express 1.1 /1.0 x4 (2.5 GT/s)
POWER REQUIREMENTS: 12 V @ 120 mA
3.3 V @ 720 mA
Total 3.816 Watts
DIMENSIONS: 11.46 cm long by 9.85 cm high
(4.510" long x 3.876" high)
CERTIFICATIONS: ROHS Compliant
EPIX SOFTWARE Support:

Supported by XCAP-Lite (no charge with board purchase), XCAP-Ltd, XCAP-Std, XCLIB, and XCLIBIPL. 
Compatible with 32-bit & 64-bit Windows 10, 8, 7, Vista, XP, 2000, LINUX, and 32-bit DOS. Also TWAIN and Image-Pro Compatible.