M118 Series CIS Modules
Our 200 - 400 dpi contact image sensors come in a wide variety of designs and sizes from 304 mm to as small as 12 mm scanning length. The M218 series of modules is based on our dual resolution 200/400 dpi C118 silicon. Available in aluminum or plastic, 1 to 4 video outputs, the devices can be configured to meet your specific requirements.
Specifications
- 150 V/Lux-Sec @ 400 dpi
- 300 V/Lux-Sec @ 200 dpi
- 200 - 400dpi user selectable resolution
- 62.5 µm pixel center to center spacing
- On chip OP amp
- Low fixed pattern noise
- 5 V or 3.3 V power supply
- 5 V or 3.3 V input signal interface
| Module Name | Sensor Length | LED | CLK MHz | (µSec/line/color) |
| M118-A3M1 | 305 | UV, W | 6.0 | NA / 1000 |
| M118-A3M2 | 305 | UV, Red | 6.0 | NA / 500 |
| M118-A4C1 | 216 | R,G,B | 5.0 | NA / 700 |
| M118-A4C3 | 216 | R,G,B | 5.0 | 125 / 250 |
| M118-A4W2 | 216 | W | 5.0 | 200 / 400 |
| M118-A6R1 | 108 | Red | 5.0 | 200 / 400 |
Timing
The timing diagram indicates a device with three video outputs. The device can be fully scanned in 1,190 clock cycles (38 inactive clock cycles plus 1152 clock cycles) to clock out the video.
In the example, some amount of overscan can be seen. Since this device uses a global shutter, the overscan period will expose the sensor elements for the next readout cycle.
Illumination
A wide variety of illumination techniques and spectrum are available on all of our devices. Custom illumination available upon request.