PIXCI A110

The PIXCI® A110 uses a programmable pixel clock with range of frequencies from 12 to 165 MHz. Video formats with vertical sync frequencies less than 40 Hz are not supported. Acquire from interlaced or progressive monochrome analog video.

Features & Benefits:

PCIe x1 low profile analog frame grabber
Plug into any PCI Express slot
2.5 gigabit per second DMA burst transfer rate
200 megabytes per second sustained transfer rate
64-bit memory addressing

Specification & Models:

Category	Details
Video Formats	UXGA, WSGA+, WXGA, SXGA+, SXGA, XGA, SVGA, VGA, RS343, CCIR, RS-170, and others. (Video formats with vertical sync frequencies less than 40 Hz are not supported.)
Supported Resolutions Include	1920x1080i, 1280x720p, 720x480p, 720x576p, and others.
Bit Depth	10 or 8 bits per pixel.
Pixel Clock Range	12 MHz to 165 MHz.
Data Transfers	Supports cameras with data output rates up to 250 MBytes/second. Burst data rates to PCIe bus at 2.5 megabits per second. 64 bit memory addressing.
Bus Requirement	PCI Express x1, x4, x8, or x16 slot.
Connectors	One BNC for monochrome analog video. 15 pin DSUB for LVTTL input and output. 10 pin header for Trigger, Frame Enable, Strobe, and General Purpose I/O.
Analog Input	0.5 volt to 2.0 volt peak to peak 75 ohm input termination.
LVTTL Input and Output	3.3 volt LVTTL signals on DB15 connector.
Power Requirements	3.3 volts at 150 milliamps. 12 volts at 200 milliamps.
Dimensions	8.38 cm long by 6.88 cm high (3.450 inches long x 2.713 inches high).
Certifications	CE Compliant. ROHS Compliant.
EPIX Software Support	Supported by XCAP-Lite (no charge with board purchase), XCAP-Ltd, XCAP-Std, XCLIB, and XCLIBIPL. Compatible with 32-bit & 64-bit Windows 10, 8, 7, Vista, XP, 2000, LINUX, and 32-bit DOS. Also TWAIN and Image-Pro Compatible.

Image Capture

10 bits per monochrome pixel
Interlaced or progressive scan
Video to disk or memory
Programmable video formats
Triggered image sequence capture
Camera exposure and asynchronous reset control

Video Formats

RS-170, CCIR, RS-343, VGA, SVGA, XGA, WXGA
SXGA, SXGA+, WXGA, WSGA+, UXGA
1920x1080p, 1920x1080i, 1280x720p, 720x480p, 720x576p
Supports vertical sync frequencies greater than 40 Hz
Pixel clocks from 12 to 165 MHz
PLL locks pixel clock to sync

Connections

BNC jack for monochrome analog video capture
Trigger and frame enable inputs
Strobe output
Four general purpose inputs and four outputs on DB15

Key Specifications

12 volts @ 200mA, 3.3 volts @ 150 mA
8.38 cm long, 6.88 cm high, 3.450″ long, 2.713″ high
60 grams, 2.1 ounces
0 to 70 degrees Celsius operation
CE, FCC, ROHS compliant
Made in U.S.A.

Software

XCAP-Lite image capture, display, and save program included with frame grabber purchase
XCAP-LTD captures video to computer memory and more..
XCAP-STD streams video to disk and performs image processing and more..
PIXCI Selection Guide lists cameras supported with dedicated Capture & Adjust dialogs
XCAP supports all camera link cameras connected to PIXCI® frame grabbers
XCLIB programmer libraries for frame grabber and camera control
PXIPL image processing, measurement, and analysis libraries
Windows & Linux, 32 & 64-bit
TWAIN compatible
3rd Party software solutions also available.