PIXCI A310

The PIXCI® A310 uses a programmable pixel clock with range of frequencies from 12 to 165 MHz. Video formats with vertical sync frequencies less than 40 Hz are not supported. Separated VSYNC or an external sync separator must be used to support video formats having field rates less than 40 Hz. Acquire from interlaced or progressive analog video, monochrome or component RGB with sync on green (default), or separate horizontal and vertical sync inputs.

Features & Benefits:

PCIe x4 analog frame grabber
Use in PCI Express bus x16, x8, or x4 slot
10 gigabit per second DMA burst transfer rate
700 megabytes per second sustained transfer rate
64-bit memory addressing

Specification & Models:

Category	Details
Video Formats	UXGA, WSGA+, WXGA, SXGA+, SXGA, XGA, SVGA, VGA, RS343, CCIR, RS-170, and others.
Supported Resolutions Include	1920x1080p, 1920x1080i, 1280x720p, 720x480p, 720x576p, and others.
Bit Depth	30, 24, 10, or 8 bits per pixel.
Pixel Clock Range	12 MHz to 165 MHz.
Maximum PCIe Data Rate	700 Megabyte per second sustained data transfer.
Memory Addressing	64-bit DMA.
Bus Requirement	PCI Express x4, x8 or x16.
Input Connectors	BNC (3) for RGB inputs or DB15 for RGB inputs and H&V.
Input/Output	Two general purpose inputs and outputs. One trigger Input. One strobe output. All LVTTL.
Power Requirements	727mA at +3.3V, 510mA at +12V, 8.52 total Watts.
Dimensions	5.150″ long x 3.575″ high (13.081 cm x 9.081 cm).

Image Capture

10 bits per color and 30 bits per pixel
Component RGB color or monochrome
Interlaced or progressive scan
Video to disk or memory
Programmable video formats
Triggered image sequence capture
Camera exposure and asynchronous reset control

Video Formats

RS-170, CCIR, RS-343, VGA, SVGA, XGA, WXGA
SXGA, SXGA+, WXGA, WSGA+, UXGA
1920x1080p, 1920x1080i, 1280x720p, 720x480p, 720x576p
Pixel clocks from 12 MHz to 165 MHz
PLL locks pixel clock to sync
Supports vertical sync frequencies greater than 40 Hz

Connections

BNC jacks for RGB input with sync on green
Dsub 15 pin connector for alternate RGB input
Trigger and frame enable inputs
Strobe output
Two general purpose inputs and two outputs

Key Specifications

12 volts @ 510mA, +3.3 volts @ 727 mA
13.1 cm long, 9.04 cm high, 5.15″ long, 3.56″ high
128 grams, 4.5 ounces
0 to 70 degrees Celsius operation
CE, FCC, ROHS compliant
Made in U.S.A.

Software

XCAP-Lite image capture, display, and save program included with frame grabber purchase
XCAP-LTD captures video to computer memory and more..
XCAP-STD streams video to disk and performs image processing and more..
PIXCI Selection Guide lists cameras supported with dedicated Capture & Adjust dialogs
XCAP supports all camera link cameras connected to PIXCI® frame grabbers
XCLIB programmer libraries for frame grabber and camera control
PXIPL image processing, measurement, and analysis libraries
Windows & Linux, 32 & 64-bit
TWAIN compatible
3rd Party software solutions also available.