PIXCI CL1

Capture

• Base Camera Link camera
• Line scan or area scan cameras
• Monochrome or color cameras
• Individual lines or frames
• Continuous video
• Up to 4,096 pixels per line
• Up to 4,096 lines per image (area scan)
• Up to 65,534 lines per image (line scan)
• Triggered image sequence

Trigger and I/O

• Camera exposure and asynchronous reset control
• Trigger and frame enable inputs
• Strobe output
• General purpose inputs and outputs
• 26 pin MDR Camera Link connector
• 9 pin Dsub for trigger and I/O

Key Specifications

• 5 volts @ 530 mA
• 32 bit / 33 MHz PCI bus master, or 64 bit / 66 MHz PCI bus master slot
• 3.3 or 5volt PCI signaling
• 12.5 cm long, 8.3 cm high, 4.91” long by 3.27” high
• 77 grams, 2.7 ounces
• 0 to 70 degrees Celsius operation
• CE, FCC, ROHS compliant
• Camera pixel clocks from 20 to 85 MHz
• Made in U.S.A.

Software

• XCAP-Lite image capture, display, and save program included with frame grabber purchase
• XCAP-LTD captures video to computer memory and more..
• XCAP-STD streams video to disk and performs image processing and more..
• PIXCI Selection Guide  lists cameras supported with dedicated Capture & Adjust dialogs
• XCAP supports all camera link cameras connected to PIXCI® frame grabbers
• XCLIB programmer libraries for frame grabber and camera control
• PXIPL image processing, measurement, and analysis libraries
• Windows & Linux, 32 & 64-bit
• TWAIN compatible
• 3rd Party software solutions also available.

TTL MODULE

The optional TTL Module minimizes false triggers when using a TTL trigger with a cable longer than one foot. The TTL MODULE converts the TTL trigger into a differential signal for reliable triggering with up to 200 feet of cable. The TTL MODULE also can generate a TTL strobe from the attached PIXCI® board. Compatible with PIXCI® CL1, CL2, CL3SD, D2X, D3X, SI, and SI4.