Specifications– MCA5MUSB
Model Number STC-MCA5MUSB3
Image Sensor 1/2.5″5M pixel Color CMOS (Aptina:MT9P031I12STC)
Active Picture Elements 2592(H) x 1944(V)
Cell Size 2.2 (H) x 2.2 (V) μm
Scanning System Progressive
Shutter Type Rolling Shutter
Scanning Mode Full Scanning, Variable AOI (Horizontal / Vertical)
Maximum Frame Rate (in Full Scanning Mode) QSXGA: 2592 x 1944 : 14fps (Settable from 6.88 to 14fps) *Frame rate will drop if connected with the USB2.0 port. (Raw 8bit output: 7fps、Raw 10/12bit output 3.5fps）
Sync. System Internal
Video Output Format RAW8bit/10bit/12bit, Mono8bit/10bit/12bit
S/N Ratio (8bit) ≤ 4 Digit (Gain 0 dB)
Minimum Scene Illumination 9 Lux at F1.2
ALC Auto Shutter / Auto Gain
Electronic Shutter Free-run Mode: Exposure Time -- 32 μsec to 38sec (in full scanning mode)
Edge Preset Trigger Mode: Exposure Time -- 32 μsec to 38sec (in full scanning mode)
Pulse-width Trigger Mode: Exposure Time -- 32 μsec to unlimited (in full scanning mode)
Gain Analog 0 to 26.97 dB, Digital 0 to 12.04 dB
Digital Clamp 0 to 255 (LSB of 12bit output)
Gamma 0.1 to 4.0 (settable with 0.1 step)
AOI AOI (Horizontal: 32 to 2592 pixels / Vertical: 32 to 1944 lines) Adjustable Steps: 4 pixels in horizontal direction and 4 lines in vertical direction
Binning Function Horizontal 1/2, 1/4 Vertical 1/2, 1/4 *Only pixels in the horizontal direction can be added to increase the brightness.
Skipping Function Horizontal 1/2, 1/3, 1/4, 1/5, 1/6, 1/7 Vertical 1/2, 1/3, 1/4, 1/5, 1/6, 1/7, 1/8
Mirror Image Horizontal / Vertical / Horizontal and Vertical
Pixel Defect Correction Up to 64 pixels (This function is turned off at shipping.)
White Balance Auto / Manual/ One-shot
Operational Mode Free-run / Edge-preset Trigger/ Pulse-width Trigger / Start and Stop Trigger
Frame Memory One Frame
Interface USB3.0 Super speed (USB3.0 Micro B)
Input/Output Two Inputs and Two Outputs
Power Input Voltage +5V(typ.) (Conform to USB Standard)
Consumption Less than 2W
Model Number STC-MCA5MUSB3
Image Sensor 1/2.5″5M pixel Color CMOS (Aptina:MT9P031I12STC)
Active Picture Elements 2592(H) x 1944(V)
Cell Size 2.2 (H) x 2.2 (V) μm
Scanning System Progressive
Shutter Type Rolling Shutter
Scanning Mode Full Scanning, Variable AOI (Horizontal / Vertical)
Maximum Frame Rate (in Full Scanning Mode) QSXGA: 2592 x 1944 : 14fps (Settable from 6.88 to 14fps) *Frame rate will drop if connected with the USB2.0 port. (Raw 8bit output: 7fps、Raw 10/12bit output 3.5fps）
Sync. System Internal
Video Output Format RAW8bit/10bit/12bit, Mono8bit/10bit/12bit
S/N Ratio (8bit) ≤ 4 Digit (Gain 0 dB)
Minimum Scene Illumination 9 Lux at F1.2
ALC Auto Shutter / Auto Gain
Electronic Shutter Free-run Mode: Exposure Time -- 32 μsec to 38sec (in full scanning mode)
Edge Preset Trigger Mode: Exposure Time -- 32 μsec to 38sec (in full scanning mode)
Pulse-width Trigger Mode: Exposure Time -- 32 μsec to unlimited (in full scanning mode)
Gain Analog 0 to 26.97 dB, Digital 0 to 12.04 dB
Digital Clamp 0 to 255 (LSB of 12bit output)
Gamma 0.1 to 4.0 (settable with 0.1 step)
AOI AOI (Horizontal: 32 to 2592 pixels / Vertical: 32 to 1944 lines) Adjustable Steps: 4 pixels in horizontal direction and 4 lines in vertical direction
Binning Function Horizontal 1/2, 1/4 Vertical 1/2, 1/4 *Only pixels in the horizontal direction can be added to increase the brightness.
Skipping Function Horizontal 1/2, 1/3, 1/4, 1/5, 1/6, 1/7 Vertical 1/2, 1/3, 1/4, 1/5, 1/6, 1/7, 1/8
Mirror Image Horizontal / Vertical / Horizontal and Vertical
Pixel Defect Correction Up to 64 pixels (This function is turned off at shipping.)
White Balance Auto / Manual/ One-shot
Operational Mode Free-run / Edge-preset Trigger/ Pulse-width Trigger / Start and Stop Trigger
Frame Memory One Frame
Interface USB3.0 Super speed (USB3.0 Micro B)
Input/Output Two Inputs and Two Outputs
Power Input Voltage +5V(typ.) (Conform to USB Standard)
Consumption Less than 2W