StreamPix Remote - Alrad

StreamPix Remote - New StreamPix 9 Release

StreamPix Remote - New StreamPix 9 Release

  • Do you need more than one StreamPix instance to achieve your multiple camera image streaming capture?
  • Are you using multiple computers with multiple cameras?
  • Do you need a single application that can remotely control all StreamPix instances over a LAN?

StreamPix Remote allows advance remote management of high speed video recording stations.


  • Remotely view StreamPix images (live feed or playback).
  • Remote control over the main features of StreamPix.
  • Create new remote sessions based on computer name or IP address and StreamPix workspace name.
  • Show real-time per computer and per workspace status information.
  • File history available for better video shoot management.
  • Efficient CPU usage and network traffic monitoring.
  • Ability to send notifications to a 3rd-party application via UDP protocol.
  • Remotely control camera settings and adjustments (for simultaneous control cameras must be identical).
  • Support for Vicon Blade messaging protocole.
  • Operate via wired LAN or Wifi network.
software interface

Your application requires the capturing of 8 sequences simultaneously from 8 different cameras at the same time.

  • Because of the camera used, the required bandwidth implies the use of 2 different computers, one for each group of 4 cameras.
  • Hence 2 computers are required with one copy of StreamPix per computer.
  • StreamPix Remote can operate on any of the 2 computers that are running StreamPix or any other computer on the network (LAN or Wifi).
  • Any operation such as "start recording" performed on the StreamPix Remote will automatically start recording on each of the 2 copies of StreamPix simultaneously for all 8 cameras.
  • StreamPix Remote gives you the flexibility to remotely control each camera workspace indivudually.
network layout

Third party remote control:
StreamPix Remote can be remotely controlled by Vicon Blade Mocap systems. StreamPix Remote will decode Vicon Blade messages and control StreamPix Workspaces using Vicon messages. The following actions are supported:

  • Immediate start recording.
  • Immediate stop recording with or without automatic sequence file closing.
  • Start recording on matching LTC/VITC time code to sequence or jpeg files.
  • Stop recording on matching LTC/VITC time code with or without automatic sequence file closing.
  • Create recording destination sequence / JPEG file based on scene / take name.
  • IP and Port filtering for usage under multiple Vicon Blade environment.

Status broadcasting via UDP messaging:
StreamPix Remote can broadcast simple UDP messages to any UDP listener clients. For each action done into StreamPix Remote, UDP messages can be sent. Pre and Post messages are available:

  • Pre messages are UDP broadcast before the action is sent to each StreamPix connected workspace.
  • Post messages are UDP broadcast after the action was sent to all StreamPix connected workspaces.
  • IP and Port filtering.

All message codes are available on request.