PIXCI® EB1G2 - Alrad
PIXCI® EB1G2 - Alrad
PIXCI® EB1G2 - Alrad

PIXCI® EB1G2

PCI Express 2.0 x1 Base Camera Link Frame Grabber

Features

  • PCIe x1 Gen 2 low-profile desktop frame grabber
  • Operates in any PCI Express slot
  • 5 gigabit per second burst transfer rate
  • 409 megabytes per second sustained transfer rate
  • One 26-pin MDR Camera Link connector
  • Image data DMA transferred to motherboard memory
  • 64-bit memory addressing

Capture

  • From a Base Camera Link camera
  • From line scan or area scan cameras
  • From monochrome or color cameras
  • Individual lines or frames
  • Continuous video
  • Triggered image sequences

Trigger and I/O

  • Camera exposure and asynchronous reset control
  • Trigger and frame enable inputs
  • Strobe output
  • General purpose inputs and outputs

Options

  • Standard or low-profile bracket available
  • Optional standard height bracket with Dsub for trigger,etc.

Specifications

  • 12 V @ 190 mA, 3.3 V @ 130 mA
  • Average power consumption: 2.709 Watts
  • 8.38 cm long, 6.88 cm high, 3.30” long by 2.71” high
  • 48 grams, 1.7 ounces
  • 0 to 70 degrees Celsius operation
  • CE, FCC, & ROHS Compliant
  • Accepts camera pixel clocks from 25 to 85 MHz

Software

  • XCAP-Lite image capture, display, and save program included with frame grabber purchase
  • XCAP-LTD captures video to computer memory and more..
  • XCAP-STD streams video to disk and performs image processing and more..
  • PIXCI Selection Guide  lists cameras supported with dedicated Capture & Adjust dialogs
  • XCAP supports all camera link cameras connected to PIXCI® frame grabbers
  • XCLIB programmer libraries for frame grabber and camera control
  • PXIPL image processing, measurement, and analysis libraries
  • Windows & Linux, 32 & 64-bit
  • TWAIN compatible
  • 3rd Party software solutions also available.

Specifications:

SIGNAL INPUT & OUTPUT:
EIA RS-644 (LVDS) Drivers & Receivers
support pixel clock frequencies up to 85 MHz.
PERFORMANCE:
Supports the camera's maximum:
Horizontal Resolution
Vertical Resolution
Frame Rate
Bit Depth
CONNECTIONS:
One 26-pin 3M MDR Camera Link connector for Base.
9-pin connector for Trigger, Frame Enable, Strobe, and General Purpose I/O.
Camera Link cables available.
DATA TRANSFERS:
Supports cameras with data output rates up to 409 MBytes/second.
(Performance may vary depending on computer system capabilities.)
64-bit memory addressing
BUS REQUIREMENTS:
PCI Express x1 Gen 2 or better slot.
Operates in PCI Express x16, x8, x4, or x1 slot.
DIMENSIONS:
8.38 cm long by 6.88 cm high
(3.30" long x 2.71" high)
CERTIFICATIONS:
CE Compliant
ROHS Compliant
EPIX SOFTWARE Support:

Supported by XCAP-Lite (no charge with board purchase), XCAP-Ltd, XCAP-Std,XCLIB, and XCLIBIPL. 
Compatible with 32-bit & 64-bit Windows 10, 8, 7, Vista, XP, 2000, LINUX, and 32-bit DOS. Also TWAIN and Image-Pro Compatible.